Professor Janice M Barton BSc, PhD, CEng, CPhys, FInstP, MIMechE

Visiting Professor of Experimental Mechanics

Professor Janice M Barton is a Visiting Professor of Experimental Mechanics within Engineering and Physical Sciences at the University of Southampton.

Biography (brief career summary) of Professor Janice Barton

Dates	Career Summary
1992 -1993	University of Central Lancashire Department of Engineering and Product Design Lecturer
1993 - 1999	University of Liverpool Department of Mechanical Engineering (1993-1997) Department of Engineering (1997-1999) Lecturer
1999 -	School of Engineering Sciences, FSIRG Lecturer (1999-2002) Senior Lecturer (2002-2004) Reader in Experimental Mechanics (2004-2007) Professor of Experimental Mechanics (2007-)

Research

Responsibilities

Publications

Teaching

Contact

Research interests

experimental mechanics
imaging
thermography/thermoelastic stress analysis
non-destructive testing
damage assessment
mechanics of composites and sandwich structures
acoustic emission
small scale testing
high speed imaging
dynamic testing
image correlation

Affiliate research group

Maritime Engineering

Research project(s)

The use of optical techniques to assess the performance of composite materials under high velocity deformations

Analysis of adhesively-bonded composite joints

Improvements to experimental approach for application of optical methods to high-speed testing of composites

An investigation into the face sheet debonding of glass balsa sandwich composites

Applications of thermography for material and structures monitoring and assessment

Digital image correlation for high strain rate behaviour investigation on glass fibre reinforced polymers

Potential for evaluating residual stress using thermoelastic stress analysis

A new tool to identify defects in adhesively bonded joints

Thermal degradation of foam cored sandwich structures

Imaging the mechanical properties of welds

Welding is a very important industrial joining technique.

Novel Integrated Imaging Approaches for Damage Characterisation of Composite Materials and Structures

The project aims at developing an idea known as ‘Strain-based NDE’. Here full field imaging techniques are used to capture data that is directly related to the strain caused by the damage to provide prognostic information on the effect of damage in composite materials.

High-fidelity testing of wind turbine blade substructures

High-fidelity evaluation of wind turbine blade substructural components by combined submodelling and testing.

Integrated experimental and computational characterisation of advanced composite materials subjected to multiaxial loading

Associate Dean for Infrastructure
Responsible for coordinating the activities in the Transport Systems Research Laboratory (TSRL)

Sort via:TypeorYear

Articles

Books

Dulieu-Barton, J. M. (2009). 7th international conference on modern practice in stress and vibration analysis. (Journal of Physics: Conference Series; Vol. 181). Institute of Physics Publishing.
Eaton Evans, J., Dulieu-Barton, J. M., & Burguete, R. L. (Eds.) (2009). Modern stress and strain analysis: a state of the art guide to measurement techniques. (Eureka Magazine Publications). Findlay Media.
Dulieu-Barton, J. M., Lord, J. D., & Green, R. J. (Eds.) (2008). Advances in experimental mechanics VI. (Applied Mechanics and Materials; Vol. 13-14). Trans Tech. https://doi.org/10.4028/www.scientific.net/AMM.13-14
Pullin, R., Holford, K. M., Evans, S. L., & Dulieu-Barton, J. M. (2006). Acoustic emission testing. Trans Tech.
Dulieu-Barton, J. M., & Quinn, S. (Eds.) (2005). Advances in Experimental Mechanics IV. (Applied Mechanics and Materials; Vol. 3-4). Trans Tech.
Ostachowicz, W. M., Dulieu-Barton, J. M., Holford, K. M., Krawczuk, M., & Zak, A. (Eds.) (2005). Damage Assessment of Structures VI: DAMAS 2005: Proceedings of the 6th International Conference on Damage Assessment of Structures (DAMAS 2005) Gdansk, Poland, 4th to 6th July 2005. (Key Engineering Materials; Vol. 293). Trans Tech.
Dulieu-Barton, J. M., Brennan, M. J., Holford, K. M., & Worden, K. (Eds.) (2003). Damage assessment of structures V. (DAMAS). Trans Tech.
Holford, K. M., Dulieu-Barton, J. M., Brandon, J. A., Gilchrist, M. D., & Worden, K. (Eds.) (2001). Damage assessment of structures IV. (DAMAS). Trans Tech.

Book Chapters

Conferences

Reports

Quinn, S., Wang, Y., MacDonald, A., Jogia, M., Thomsen, O., & Barton, J. (2019). Modernising composite materials regulations: Structural approval procedure for marine structures. University of Southampton.
Stevens, R., Quinn, S., Veal, R., Gerrard, S., Tsimplis, M., Dulieu-Barton, J., & Thomsen, O. (2017). Modernising composite materials regulations: A position paper. University of Southampton. http://www.southampton.ac.uk/CompositeRegulations
Shenoi, R. A., Dulieu-Barton, J. M., Jeong, H. K., Winkle, I. E., Day, A. H., & Boyd, S. W. (2002). Use of pre-formed composites for cost-effective fast marine craft construction. University of Southampton.

Module title	Module code	Discipline	Role
Analysis and Design Optimisation of Laminated Composite Structures	SESG6024	Engineering Sciences	Course leader
Experimental Mechanics	SESG6031	Engineering Sciences	Course leader
Marine Engineering	SESS2004	Ship Science	Course leader
Sensors and Signal Processing for Condition Monitoring	SESG6027	Engineering Sciences	Course leader
Composites Engineering	SESG6022	Engineering Sciences	Course leader

Professor Janice M Barton
Engineering, University of Southampton, Highfield, Southampton. SO17 1BJ United Kingdom

Room Number: 176/3031

Share this profile Share this on Facebook Share this on Twitter Share this on Weibo

Privacy Settings