The University of Southampton
Engineering and the EnvironmentOur research

Research Group: Mechatronics Engineering Group

Currently Active: 

Head of Group: Professor Suleiman Sharkh. The research interests of the Mechatronics Research Group (MRG) cover Electric Machines, Power Electronics, Microfluidics, Ultrasonics, Thick-film sensors, Electric contacts and Control systems

Group Overview

We are engaged in cutting-edge fundamental and applied research underpinning Electro-Mechanical technologies. Our activities are organised around four research themes, covering a wide spectrum of applications in the areas of control systems, energy conversion and management, instrumentation and sensors and microfluidics. Our strategy is to maintain a balanced portfolio of projects on a broad range of research topics, and to promote commercial exploitation of research results. We also feed our research into the undergraduate and postgraduate teaching programmes including the Advanced Mechanical Engineering Systems (AEMS) Mechatronics MSc.

Key achievements

  • The award of the inaugural International James A Lindner Prize to the Sound Archive Project: The prize recognises contributions to research in the field of technology for the preservation of moving images and recorded sound and is awarded jointly by SEAPAVAA (South-East Asia-Pacific Audiovisual Archive Association), AMIA (Association of Moving Image Archivists) and IASA (International Association of Sound and Audiovisual Archives).
  • The Engineer Innovation and Technology Award (Energy Sector) for the development of Rim Driven Marine Thruster - now produced commercially by TSL Technology Ltd..

Research themes

Our activities are organised around four research themes:

Control and Identification

Staff: Dr Dina Shona Laila, Dr Mohamed M Torbati, Dr Zhan Shu

Energy Conversion

Staff: Professor Suleiman M Sharkh, Dr Mohamed M Torbati

Instrumentation and Sensors

Staff: Professor John W McBride; Professor John K Atkinson

Microfluidics and MEMS

Staff: Professor Martyn HillDr Xize Niu, Dr Peter Glynne-Jones, Dr Dario Carugo

Contact us

Engineering Sciences Unit
Engineering and the Environment
Building 5 (Eustice)University of Southampton
Highfield Campus
Southampton SO17 1BJ


Senior Administrative Officer: Sue Berger
Tel: +44 (0)23 8059 2871
Administrative Officer: Katherine Day
Tel: +44 (0)23 8059 2841
Administrative Officer: Gwyneth Skiller
Tel: +44 (0)23 8059 5568
Administrative Officer: Fiona Haigh
Tel: +44 (0)23 80597082





Thick Film Unit

The term "thick film" refers to the fact that these sensors are fabricated using screen printing techniques that were originally developed for the production of thick film hybrid circuits that employed screen printed interconnections and passive components (such as resistors and capacitors) with surface mounted integrated circuits (chips).

The devices are typically built up in layers by printing the active materials of the sensors onto a variety of different support media (substrates).  Most commonly ceramic but increasingly steel, plastics and other materials are used.

The screen printing process forces ink (or paste) through a pre-patterned mesh or stencil (the screen) onto the substrate.  The thickness of the deposited layer is controlled by the printer and the properties of the ink define the function of the layer.  Enquiries to: Prof John Atkinson:


Sensor arrays

Thick film technology is a particularly good medium for fabricating arrays of sensors on a common substrate.  For example, a water quality sensor can consist of 13 thick film layers that make up 5 separate solid state sensors for detecting the dissolved oxygen concentration, temperature, pH, redox potential (a measure of ionic activity) and conductivity of the water.  The complete array is only 35mm in diameter and would easily fit into a matchbox. 


Chemical sensors

Using thick film chemical sensor technology the group developed a series of rugged miniaturized pH sensors for use in controlling the viscosity of printing ink.  They were funded as part of a European Commission project aimed at producing disposable sensors that would survive in the harsh environment of a printing works.  Modern printing inks are water based, as opposed to solvent based, and have to have ammonia added to them to keep them workable.  The thick film pH sensors were developed to enable the dosing of the ink to be controlled more precisely.  Thick film is an excellent means for mass producing disposable sensors as many such devices can be printed at the same time making them very cost effective to manufacture.

Postgraduate opportunities


Research Staff

Staff MemberPrimary Position
Mohammad AbusaraVisiting academic
John K AtkinsonProfessor of Engineering Science
Giuseppe CannellaResearch student with the Electro-Mechanical research group
Dario CarugoNew Frontiers Fellow
Chamaporn ChianrabutraResearch student
Kevin James CrossVisitor
Andrew CrudenProfessor of Energy Technology
James DonoghueResearch Student
Michael Peter DownPostgraduate research student
Aleksander J DubasKTP Senior Research Associate
Sam J FishlockPostgraduate research student
Michael GedgePostgraduate research student
Monika Glanc-GostkiewiczVisiting academic
Peter Glynne-JonesAssociate Professor (EPSRC Fellow)
ChinTeng GohPostgraduate research student
Sammer-ul HassanResearch Fellow
Mehdi HendijanizadehResearch Fellow in Electromechanical Engineer
Martyn HillProfessor of Electromechanical Systems
Babar HussainVisiting researcher fellow
Mohsin JamilVisiting research fellow
Mahdi KiaeeResearch Fellow in Energy Technology
Dina Shona LailaAcademic Visitor
Junjun LeiThird-year PhD research student
John W McBrideCEO Malaysia Campus
Shayan Motamedi FakhrPostgraduate Research Students
Adrian NightingaleResearch Fellow in Droplet Microfluidics and Point-of-care Diagnostics
Xize NiuAssociate Professor
Georgios OrfanoudakisKTP Research Associate
Filip PlazonicPhD student
Suan Hui PuAssistant Professor
Suleiman SharkhProfessor of Power Electronics Machines and Drives
Dina Shona LailaLecturer
Zhan ShuLecturer
Zhen TianPostgraduate research student
Mohamed Moshrefi- TorbatiLecturer
Aravinthan VijayakumarUndergraduate Student
Ling WangProfessor of Tribo-Sensing
Zijun ZhaoResearch Fellow
    Share this research group Share this on Facebook Share this on Google+ Share this on Twitter Share this on Weibo

    We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we will assume that you are happy to receive cookies on the University of Southampton website.