Dr Ahmed S.J Al-Zubaydi PhD in Engineering Materials, University of Southampton
Academic Visitor
- Related links
- Personal homepage
Ahmed Sattar Jabbar Al-Zubaydi is an Academic Visitor in Engineering and Physical Sciences at the University of Southampton.
Materials processing by severe plastic deformation.
Ahmed obtained his PhD in Engineering Materials from University of Southampton in 2016 in field of bulk nanostructured materials produced by severe plastic deformation. His work focused on the processing of magnesium alloy at room temperature using high pressure torsion and investigation the resultant mechanical and thermal behaviours.
His research interests are nanomaterials, metals and alloys processing, severe plastic deformation, light alloys, materials characterization.
Education
- 2011–2016 PhD in Engineering Materials, School of Engineering Sciences, Faculty of Engineering and the Environment, University of Southampton (UK), thesis: High-pressure torsion processing of AZ91 magnesium alloy.
- 2003–2006 MSc in Materials Science, Applied Science Department, University of Technology (Iraq).
- 1999–2003 BSc in Materials Science, Applied Science Department, University of Technology (Iraq).
Employment History
- 2006–2011: Assistant lecturer, Applied Science Department, University of Technology, Iraq.
- 2016-now: Lecturer, Applied Science Department, University of Technology, Iraq.
Teaching
:
1. Module of Extraction of Materials for 1st year at the Applied Science Department at University of Technology (2010-2011).
2. Vacuum & Thin Films and Ceramics in laboratories (2005-2011) at the Applied Science Department at University of Technology.
3. Materials’ Properties laboratory (2016-2019), Metallurgy laboratory (2016-2017) at the Applied Science Department at University of Technology.
4. Module of Medical Physics for the 2nd year at the Biomedical Engineering Department at the University of Technology (2017-2020).
5. Module of Micro-Electromechanical Systems for the 3nd year at the Biomedical Engineering Department at the University of Technology (2018-2020).
6. Module of Nanotechnology for the 4th year at the Control and System Engineering Department at the University of Technology (2018-2019).
7. Module of Biomedical Acoustics for the 5th year at the Biomedical Engineering Department at the University of Technology (2019-2020).
8. Module of Medical Radiography for the 5th year at the Biomedical Engineering Department at the University of Technology (2019-2020).
9. Module of Materials Fundamentals for the 1st year at the Applied Science Department at the University of Technology (2019-2020).
Publications
Ahmed Sattar Jabbar Al-Zubaydi, Rana M Salih, Balqees M Al-Dabbagh (2020) ‘Effect of nano TiO2 particles on the properties of carbon fiber-epoxy composites’, Progress in Rubber, Plastics and Recycling Technology, https://doi.org/10.1177%2F1477760620977502.
Al-Zubaydi, Ahmed ; Figueiredo, Roberto B.; Huang, Yi; Langdon Terence G. (2013) ‘Structural and hardness inhomogeneities in Mg-Al-Zn alloys processed by high-pressure torsion’, Journal of Materials Science, 48:4661–4670.
Huang, Yi; Kawasaki Megumi; Al-Zubaydi, Ahmed ; Langdon Terence G. (2014), ‘Effect of anvil roughness on the flow patterns and hardness development in high-pressure torsion’, Journal of Materials Science, 49:6517–6528.
Huang, Yi; Kawasaki Megumi; Al-Zubaydi, Ahmed ; Langdon Terence G. (2014), ‘An overview of flow patterns development on disc lower surfaces when processing by high-pressure torsion’, Journal of Materials Research and Technology, 3(4):303–310.
Al-Zubaydi, Ahmed ; Zhilyaev, Alexander P.; Wang, Shun C.; Reed, Philippa A.S., (2015), ‘Superplastic behaviour of AZ91 magnesium alloy processed by high-pressure torsion’, Journal of Materials Science & Engineering A, 637 1–11.
Al-Zubaydi, Ahmed; Zhilyaev, Alexander P.; Wang, Shun C.; Kucita; Pawee, Reed, Philippa A.S., (2015), ‘Evolution of microstructure in AZ91 alloy processed by high-pressure torsion’, Journal of Materials Science, 51: 3380–3389.
Ahmed Sattar Jabbar (2012), “Studying the effect of corrosive liquids on pipes properties of unplastizied polyvinyl chloride (UPVC) which is used in sewage purpose”, Journal of Engineering and Technology, 30:15, 329-340.
Ahmed Sattar Jabbar, Balqees Mohammed Deyaa (2011), “Study of the mechanical properties for particulate polymer blend composite”, Journal of Engineering and Technology, 29:2, 76-85.
Ali M. Mousa, Adawiya J. Haider, Ahmed S. Jabbar (2008), “Characterization of D.C. sputtering system”, Iraqi Journal of Applied Physics Letters, 1, 3-9.