Skip to main content

Postgraduate research project

The use of additive manufacturing (AM) to increase the multifunctionality of spacecraft structures

Funding
Competition funded View fees and funding
Type of degree
Doctor of Philosophy
Entry requirements
2:1 honours degree View full entry requirements
Faculty graduate school
Faculty of Engineering and Physical Sciences
Closing date

About the project

Satellites need to operate in an increasingly harsh and crowded space environment with tighter constraints on material selection due to environmental concerns. This project will focus on the development of additive manufactured multifunctional structures to improve the sustainability of the platform and the resilience of the spacecraft to hypervelocity impacts.

Spacecraft structures for both small and large spacecraft are highly optimised structures balancing stiffness requirements with low mass. However, with the use of additive manufacturing (AM), parts of the structure can be used to enhance subsystem integration. Examples of this are: 

  • the addition of geometry in sandwich panel honeycomb cores to enhance the shielding potential of the primary structure to hypervelocity impacts
  • the inclusion of demisable inserts or geometrical features to enhance the satellites demise through re-entry
  • the inclusion of heat pipes to create more effective thermal paths etc. 

However, recent research has identified that aluminium (the most widely used material in spacecraft structures) has a severe negative impact on the environment when the satellite burns up on re-entry.

This PhD will look to develop previous work on satellite AM multifunctional structures at the University of Southampton, within the content of these more recent environmental constraints. Various materials and hybrid structures will be explored to develop concepts for a specific satellite mass range. 

The ultimate goal of this work is to develop technologies that create environmentally sustainable, lower mass spacecraft that are more resilient to the threats that are present in low Earth orbit.

Please note that this project is only open to UK nationals.